I’ll post the code soon, but first I wanted to just briefly go over actually attaching the screen to the Arduino. I ended up buying a parallel screen which requires quite a few more connection points compared to using a serial screen. I used this wiring scheme to hook-up the LCD. Finding the correct diagram for my screen took a little while of searching around the net, but once I found the right one everything worked well. (Sorry for the poor photo quality.)

Hookup wire. The 22 gauge wire fits snugly into the Arduino. Getting two wires into the same port is tricky, however.

Arduino with LCD screen.

Wires cut to length.

LCD connected to Arduino.

Hello, World!

No more trying to scroll through long posts riddled with photos only to have my favorite browser buckle under the load.

If you’re a fan of Jason Calacanis(Mahalo & Weblogs, Inc. founder) you’ll instantly be lured in with his Vaynerchuk up-frontess yet invaluable industry insight which all comes out in engaging stories and personal examples. Everything any tech junky could ask for. This Week in Startups has some great segments, but this podcast is balls long.

Brutally Long
The only blaring downside to TWiST is its length. It’s brutally long. Weighing in at almost 2 and a half hours, TWiST is ridiculously lengthy. It’s really four shows mashed together. They’re kick ass shows, but it’s like a Halo marathon… eventually you have to get up and take a break.

Where My Pitches at?
The first show is pitch hour where people call in and literally pitch their ideas to Jason, which is awesome. These guys get some honest feedback about their ideas and pitch methods. Jason will call your methods donkey.

Guest Hour
During the second show we finally get to the guest, Matt Mickiewicz, who explains his success with hosting a forum for Graphic Design spec work.

The Obligatory Anti-Spec Rant
A large portion of the Design community sees services like Mickiewicz’s degrading the value of professional Graphic Design. I agree completely, but the AIGA can explain that issue much better than I can.

I’ll just say you get what you pay for with services like 99Designs. If nothing else, it groups the 80% of the 80/20 rule clients into one nicely avoidable area.

With that said, Mickiewicz is a smart guy with several successful startups under his belt. One of which includes SitePiont which he started when he was only 15. And Jason Calacanis did a good job of looking at both sides of the spec issue.

News Segment
Show four, the news segment, brings out a lot of Jason’s insight into why he is the master of marketing. In one segment he can unmercifully bash the Apple fan boys and then magically turn around and sell you on an Apple Computer all in about a 2 minute span. Andrew Warner is a bit stiff. It would be interesting to see someone as loose as Jason delivering the news.

Giri
The final of the four shows actually runs at the beginning of the podcast as 20 minutes of sponsors and Mahalo promos. This is fine and we all love Audible and the others. In fact, the sponsorship level of the show in just 13 episodes is rather impressive.

In the End
TWiST hits on about 7 of 8 cylinders in terms of concept and content. It’s classic Calacanis with his money knot and marketing mastery. He’ll call you out but keep you reeled in just enough to keep you on the line. A few more episodes under their belts and trimming out a bit of excess fat should make This Week in Startups a truly must-listen podcast for any tech fiend.

Installation And Hardware
I’ve been using Jolicloud on my Dell Mini 9 Netbook for about a week. Eventhough this is still alpha software, the install process was super smooth and this is the first Linux distro I’ve used where wireless works right away with no crazy custom kernel compiles and fanangaling.

Another nice touch is having a Flash plugin installed and working from the start. No need to install that separately.

Look and Feel
The Jolicloud interface is beautiful. We all live within the realm of the web these days and this interface is designed to fit in that world. The Jolicloud interface feels like a trim, slick web app rather than a dated and clunky desktop experience.

Oh so good, but oh so not
And where Jolicloud really shines, it’s also falling terribly short. While the Jolicloud interface is fantastic, it’s very limited in scope, as the Jolicloud interface is really only for app installation. So your desktop and application launcher, where you spend the most of your time, is a rebranded version of the Ubuntu NBR launcher application.

The Ubuntu NBR launcher is a fine app, but if the Jolicloud team can extend its app installer interface across the entire OS, they’ll really have something special. That Jolicloud interface is so well done, I want to see it everywhere!

Makes Perfect Sense
Wanting to edit a document from Google Docs, it feels so natural to just click on the Google Docs icon on my desktop. It performs so much like a traditional app, yet it’s all being run from the cloud in the sky. This is the future and Jolicloud is leading the way.

As a side note, this post was written with photos imported and resized entirely with Jolicloud.

Follow Friday needs to get back to its roots. Choose ONE interesting person, post their name, and explain WHY they are worth following. That’s it.

Remember: ONE interesting person per Friday and explain WHY.

P.S. Also, as an aside, rambling about your personal health problems is the quickest way to garner an unfollow. No one wants to read that. No one.

For over a year now my server has been pulling down an hourly snapshot of the current NOAA weather alerts.

This is a one year time lapse compiled from these images from March 2008 to March 2009. A snapshot of alerts was taken every hour. At 24 frames per second: 1 second = 1 day.

The homemade DTV antenna has been assembled and installed. Everything seems to be working well. All the local channels tune-in just fine. My TV doesn’t display signal strength, so I don’t really have any way of knowing if the signal is any stronger compared to the rabbit-ears. But it does get rid of the ugly antenna in the living room.

I placed the antenna in the attic above the garage and set-up an A-B switch to allow switching the living room TV between antenna and cable, should we ever subscribe to Comcast again.

Larger washers might be helpful, but other than that, the Make instructions worked out well.

I’ve replaced or borrowed all my hardware trying to figure out the bad piece: 3 motherboards, 2 PSUs, 2 graphics cards, 3 CPUs, 2 hard drives, 2 optical drives, 2 CPU fans, countless RAM sticks, even set the machine up outside of the case and still get the same result.

Sometimes the machine powers up and works great. This usually occurs after replacing a piece of hardware. Fan, drive, PSU, etc. But eventually it goes back to the blank start.

With this latest iteration of components, I believe I’ve narrowed the problem down to the motherboard. When powering the machine on (with minimal components: graphics card, RAM, CPU & CPU fan) the machine spins up for a few seconds then shuts itself down. Then it turns itself back on again and off again and so on and so on until I hit the PSU switch.

When I unplug the small power cable used to power the CPU, the machine turns on and stays on, but never POSTs. I’ve tried two other CPUs with the CPU power cable test and get the same results. I know my CPUs are good because they came from working systems.

So this leads me to the motherboard. The problem is, I’ve replaced the motherboard before, only to have the same problems happen again down the line.

I’m thinking about selling everything and starting fresh.

The bottom line being, it’s pretty much not worth the cost and AT&T could give a damn about their customers.

AT&T
Compared to Sprint, AT&T reception is terrible at my house. Even though I’m in ‘Good’ coverage on the map, I’m lucky to get 1 bar. Sometimes I have no service. I have to go outside to make important phone calls.

AT&T prorates your first bill and charges you for the upcoming month of service you haven’t yet used. Two weeks into using my new carrier I received a bill for $143. Charges included two weeks of service, a $36 activation fee (total BS), ~$10 of state taxes and about $18 of federal taxes, plus the fee for the next month of service that I haven’t yet used. I’m on the $70/mo. plan.

I know technically and legally they can do it, but what a way to stick it right into your new customer’s ass right from the start. When I cancel my contract in 22 months, will I get money back for the month I’ve already paid ahead? I’ll be surprised.

So, AT&T gets zero points for service, both product-wise and customer-wise.

Apple
It’s pretty amazing that this device can do what it does, but I won’t go into all that because you can read that elsewhere. With that said, I’ve never had a cellphone that can’t keep time, but this one sure can’t. I don’t know if it’s an Apple issue or an AT&T issue, but this thing is off. And I mean randomly off. 46 minutes, 8 hours and 13 minutes… you name it. Random.

The G1
With the release of Google’s G1 on the T-Mobile network today, I’m disappointed in myself for giving AT&T my money.

The T-Mobile folks got up at the unveiling today and went on and on about opening up this platform. The whole thing is Open Source. That’s really something special.

Apple puts out excellent software and hardware, and there are excellent apps available through their system, but there’s still a good amount of freedom missing in that system.

Another thing that impressed me was when the T-Mobile rep said they would offer existing customers a benefit. (I don’t remember the exact benefit, maybe an earlier release.) But that shows that they’re at least actively thinking of their customers in a way that isn’t just a moneygrab.

I think Android will turn out to be an excellent platform. I’m not big on the HTC phone, but more devices will come.

I hope in 22 months I’ll be able to either move my iPhone over to the T-Mobile network, and if I’m lucky, have the option to put Android on my iPhone as well.